How to mitre skirting boards

How to mitre skirting boards


Posted 18th Feb 2015

As well as being a functional solution to the joint between the wall and the floor, expansion gaps and uneven plaster, skirting board also has aesthetic benefits and can improve the look and feel of a room. This can give a property a much needed update, helping your home maintain a fresh and cared for appearance. This can be a daunting task though and if the job is rushed or done incorrectly, you risk leaving gaps or messy finishes. If you are unsure about the best way to mitre, we encourage you to contact a professional. However, this guide is going to provide tips to highlight how easy this task can be when you use the correct tools and follow the right steps.

You will need

skirting Board
pencil
tape measure
Mitre box or block
fine toothed Mitre saw
sand paper

Before you begin, make sure both you and your home are going to be protected by using dust control equipment, safety glasses and face masks. You should also make sure that the area you are working in is well ventilated.

 

1. Measure

Starting with the longest wall in the room, use a tape measure to size the length of wall where the skirting board will be placed. Once you have the length, you can take a pencil and mark it on the top edge of the skirting board.

2. Work out the Angle

Mitring simply means cutting at an angle to create a neat connection between two pieces when they are adjoined on a corner or a room.

To do this, divide the angle of the corner by two e.g. a 90° corner will have a mitre cut of 45°, if it’s 30° it will have a mitre cut of 15°. The most common you will have to create will be 45°.

2. Mitring

Once you have worked out the length and the angle, you can now begin to mitre:

How you proceed depends on whether it is an external or internal corner:

Internal: for the left hand piece of skirting board, use a fine toothed mitre saw to cut from right to left, starting at the point you have marked on the top edge. For the right hand piece, saw from left to right, starting at the point you have marked on the top edge.

 

External: for the left hand piece of skirting board, saw from top left to bottom right starting at the mark on the top edge. Follow the same steps for the right hand piece, this time sawing down from right to left.

If you aren’t using a mitre box or block, draw the angle by hand with a pencil and use as a guide when cutting.

Note: As this is the most common cut, mitre boxes and blocks come designed with a pre-cut 45° angle.

3. Smoothing

Although using a fine toothed mitre saw should create a neat finish, sand smoothing the product will ensure you get the desired quality finish.

4. Fitting

Once you have mitred enough skirting board for your room, it is now time for fitting as you watch it all join together perfectly.

Use an adhesive to join the two adjoining pieces and place two nails either side of the corner for a long lasting result.

Top Tip: To cover screw heads, use a non-water based shrink resistant filler.

5. Finish

Once fitted, you can now choose a finish to complement your interior. Depending on the type of moulding you have chosen, this step could involve glossing, wood staining or painting.

If you want to avoid this extra job, opt for a foil wrapped moulding which won’t require anything other than mitring and fitting.

For high quality, easy to fit skirting board, architrave and internal window sills in a range of profiles and sizes, visit http://www.theskirtingboardshop.co.uk/.

 






Related articles

7 top tips for decorating with rugs

7 top tips for decorating with rugs


Dry January: the best alcohol-free alternatives

Dry January: the best alcohol-free alternatives


Sustainable Christmas decorations: Cate St Hill's top tips

Sustainable Christmas decorations: Cate St Hill's top tips


The best winter candles

The best winter candles


FEBRUARY ISSUE ON SALE NOW! Just £1.99!

Subscribe to our newsletter